Tools included in the Item
Wrench
Allen
Key
A socket set and adjustable spanner may also be used to further assist in swing assembly.
- IMPORTANT -
Use this parts list to make sure all parts are present before assembly. Do not attempt to
assemble the swing set if any parts are missing or damaged. Disassemble the Swing Set
immediately if any part is missing or any unsafe condition exists. Obtain a replacement
part to properly correct the hazard by calling 1800 465 070 (Australia) or 09 477 6020
(New Zealand). Do not allow use of the swing set until the hazard has been corrected.
ASSEMBLY AND INSTALLATION INSTRUCTION
Read this entire assembly section before beginning to assemble your swing set. Carefully follow each
step.
NOTE: At least 2 persons are recommended for the following assembly.
In order to avoid injuries and damage to property, it
is recommended that the Swing Set should be at
least 2 metres away from any buildings, fences and
so on. Also clear the ground of any sharp objects.
Use the Parts List to make sure all parts are present. Contact Customer Service at 1800 465 070
(Australia) or 09 477 6020 (New Zealand)
if any parts are missing. Do not attempt to assemble the
swing set if any parts are missing.
©
ACTION SPORTS EQUIPMENT PTY LTD –
www.actionsports.com.au
Page: 11
