10
S002025 Action 4 Unit Swing Set
Assembly Instructions (cont)
Step 6
Place 2 x Lower Leg As (5) into the base of 2 x Upper Legs (3) on one side of the swing set, ensuring that
the holes in the tubes line up. Take 1 x Side Bar (6) and place it on the outside of the legs, secure the side
bar and legs into position using 2 x M6 x 49mm Bolts (F4).
Repeat this for the other side of the swing set, place 2 x Lower Leg As (5) into the base of the 2 x Upper
Legs (3) ensuring that the holes in the tubes line up. Take 1 x Side Bar (6) and place it on the outside of
the legs, secure the side bar and legs into position using 2 x M6 x 49mm Bolts (F4).
Step 7
Place 2 x Lower Leg Bs (12) into the base of 2 x Upper Legs (3) in the middle of the swing set, ensuring
that the holes in the tubes line up. Take 1 x Middle Bar (4) and place it on either side of the legs, secure
the middle bar and legs into position using 2 x M6 x 49mm Bolts (F4).
3
3
3
3
3
3
3
4
3
F4
F4
12
12
4
6
6
6
5
5
12
5
5
5
