9
S002025 Action 4 Unit Swing Set
Assembly Instructions (cont)
Step 5
Attach 2 x Swing Seat (13) to the left hand side of the top bar using 4 x M8 U-Bolts (S1). Next attach 1 x
Trapeze Swing (46) the right hand side of the top bar using 2 x M8 U-Bolts (S1). Finally attach 1 x Glide
Rider Bracket (7) to the top bar using 2 x M6 x 47mm Bolts (G1).
Note:
2 x M8 U-Bolts (S1) will be pre-attached to each swing (except the glide rider).
Ensure that at least 3 threads from the M8 U-Bolts (S1) protrude through the top bar when
assembling the swing set.
Should the rope come off the bearing during use, stop using the swing seat immediately and place the
rope back over the bearing before using the swing seat again.
S1
13
13
46
G1
7
7
S1
S1
S1
S1
S1
