service@actionspares.com.au
MODEL: S002144
AFTER SALES SUPPORT
1800 465 070
14
Console Operation
1. Insert the included 2 x AA batteries into the console, and the buzzer will sound and all functions will display on
screen for about 2 seconds.
CAUTION: To prevent battery leakage:
• Be sure to insert batteries correctly and always follow manufacturer’s instructions.
• Never mix old and new batteries (replace all batteries at the same time).
• Never mix alkaline, standard and rechargeable batteries.
• Use only batteries of the same or equivalent type as recommended.
• Do not charge non-rechargeable batteries.
• Always remove exhausted or dead batteries from the product; do not dispose of batteries in fire, batteries may
explode or leak.
• Remove batteries from product before extended storage.
• Do not short circuit the supply terminals.
• Batteries may explode or leak if misused.
The things you should know before exercising
A. User Data:
You should input your personal data before workout. Press BODY FAT key to enter your personal data of age, sex,
weight and height then the monitor will save the data unless you take out the batteries.
B. Clock Mode:
1. The monitor will enter the sleep mode when there is no signal input or no keys are being pressed after 4
minutes. You can press ENTER key to switch the clock and temperature in sleep mode or press other keys to
quit the sleep mode.
2. You can set up the TIME or ALARM by holding the ENTER key for over 2 seconds. Then you can set up TIME and
ALARM by pressing the UP or DOWN keys.
3. By holding the ENTER and UP keys together for over two seconds, you can check the current time at “NO
SPEED” mode.
