* Outbound link can select only one of Wi-Fi and RJ45 wire line (LAN).
Airplay activated after web setting. (Default is off)
Quattro RX has been powered on, however, there is
neither Quattro TX nor device linked.
Shift in 3, which means “under pairing” or “building the
connection”.
Complete pairing or connection, the number showed total
Quattro TX or Device linked.
RJ45 wire line disconnected.
Shift in 3, which means “building the connection”.
RJ45 wire line connected and IP acquired
IP conflict or other network error.
Outbound Wi-Fi disconnected.
Shift in 3, outbound Wi-Fi is connecting.
Outbound Wi-Fi connected with the router name shown
underline.
Wi-Fi connection Fail, Invalid password or other Errors
Web Setting
Quattro RX IP- when Devices (either laptops or mobile phones) connect with Quattro RX with SSID &
Password directly, applying the IP in web browser can enter Admin setting page for more advance setting.
1.
Preparation-
To access the setting page, you have to choose either way to connect the devices.
1.1
Direct link- you can apply notebook or mobile phone to search Quattro RX by wifi and key in
relative SSID and Password. Turn on web browser and enter “192.168.168.1” in the address bar.
1.2
Through Wifi AP or Routers- if your Quattro RX has been connected to a certain networking device,
you can apply notebook or mobile phone to connect the same device. Turn on web browser and
enter the address show in mainpage in the Quattro Rx IP shown below.
Distribution:
PureLink GmbH
Available from B2B Online Portal
