112
Action
tec Wireless-Ready DSL Gateway User Manual
2.
When the “TCP/IP” window appears, select
Edit
from menu bar, then select
User Mode
.
3.
When the “User Mode” window appears, select
Advanced
, then click
OK
.
4.
In the “TCP/IP” window, select
Ethernet
from the “Connect via” drop-down
list
.
5.
Select
Using DHCP Server
from the “Configure” drop-down list.
6.
Ensure the “Use 802.3” option is
not
checked.
7.
Disregard any addresses in the IP Address text boxes. They will be reacquired
when the first connection is made.
8.
Click
Options
and when the “TCP/IP Options” window appears, select
Active
. Ensure the “Load only when needed” option is
not
checked, then click
OK
.
9.
Close the “TCP/IP” window and when prompted to save changes, click
Save
.
10.
Restart the computer. The TCP/IP settings are configured.
Next, go to “Connecting to the ISP” on page 86.
Summary of Contents for 1520
