60
Action
tec Wireless-Ready DSL Gateway User Manual
DSL Settings
To access
DSL
Settings, select
DSL
Settings
from the “Utilities” screen. The
Gateway’s
VPI
,
VCI
, and Mode settings can be changed from here.
Action
tec recom-
mends not changing these values without consulting the Internet Service Provider
(
ISP)
.
Restore Default Settings
To restore the Gateway to its factory default settings, select
Restore Default
Settings
from the “Utilities” screen. When the “Restore Default Settings” screen
appears, click
Restore Default Settings
. Any changes made to the Gateway’s settings
will be lost and the factory default settings will be restored. During this process, the
Gateway’s power
LED
flashes and the Gateway is disabled.
Warning
: Do not unplug the power cord from the Gateway
during the Restore Default Settings process. Doing so may result
in permanent damage to the Gateway.
When the power
LED
stops flashing and glows steadily green, the Gateway is fully
operational.
Summary of Contents for 1520
