43
Chapter 5 Configuring for Other Services / Applications
Associate a Sound with Service Access
From the Bluetooth Configuration Panel, Local Services tab:
•
Double-click a service name and then select the Notifications tab.
•
Check the desired options; visual and sound may both be selected for a
single event.
•
Choose a sound; click the Browse button and navigate to the sound file
(*.wav) to be used for notification. To preview the sound file, click the
play (>) button.
•
Click OK to close the service's property dialog box.
5.6.2 Audio Gateway
The Bluetooth Audio Gateway service allows this computer to use a remote
Bluetooth device’s microphone and speakers as this computer’s input and
output devices.
For example, if this computer has voice recognition capabilities, a Bluetooth
headset might be used as the audio input device.
Hardware Requirements
•
The Bluetooth radio on both this computer and the remote device must
support audio.
•
The remote device handles both audio input and output for this
computer; therefore, this computer does not require a sound card,
microphone, or speakers.
Configure the Audio Gateway Service
From the Windows system tray, right-click the Bluetooth icon, select
Advanced Configuration, click Local Services, and then double-click the
Audio Gateway service. Set the common configuration properties of the
service, and then click OK.
5.6.3 Bluetooth Serial Port
The Bluetooth Serial Port service allows a remote Bluetooth device to
establish a wireless serial connection with this computer. The wireless serial
connection may be used by applications as though a physical serial cable
connected the devices.
To Establish a Bluetooth Serial Port connection
•
The connection must be initiated from the remote device by the
Bluetooth Serial Port application.
