60
Action
tec USB Wireless Bluetooth Adapter
Action
tec USB Wireless Bluetooth Adapter
Determine the Bluetooth Device Address (BDA) of my Hardware
Device
In the Bluetooth Configuration Panel, on the Hardware tab, in the Devices
section, select the device you want to determine the address of. In the Device
Properties section of the dialog box, the fourth entry, Device Address, is the
BDA of the selected Bluetooth device.
Determine the Version of the Host Controller Interface (HCI)
In the Bluetooth Configuration Panel, on the Hardware tab, in the Device
Properties section, the fifth entry provides Bluetooth Specification compli-
ance information for the Host Controller Interface. The sixth entry contains
the Specification Revision information for the Host Controller Interface, if
appropriate.
Determine the Version of the Link Manager Protocol (LMP)
In the Bluetooth Configuration Panel, on the Hardware tab, in the Device
Properties section, the seventh entry provides Link Manager Protocol version
number information. The eighth entry contains the Link Manager Protocol
sub-version number information, if appropriate.
Find Information About the Bluetooth Hardware Attached to my
Computer
In the Bluetooth Configuration Panel, select the Hardware tab.
Internet Connection Sharing Does Not Work
This occurs because Internet Connection Sharing was enabled when
Bluetooth wasinstalled (this is a Microsoft Windows behavior and is consid-
ered proper operation). To resolve the “problem”:
1. Disable Sharing for the Ethernet adapter:
a) Windows Control Panel > Network and Dial-up Connections
b) Right-click “Local Area Connection,” select Properties, and then
select the Sharing tab.
c) Clear (uncheck) the box for “Enable Internet Connection Sharing
for this connection” and click OK.
2. Re-enable Sharing for the Ethernet adapter; repeat Step 1.c.), and
select (check) the sharing box.
