10
Actiontec DSL Gateway User Manual
11
Chapter 2
Performing a Basic Setup
6.
Click
Save and Restart
in the “Save and Restart” screen.
7.
The “Congratulations” screen appears. The Gateway is successfully configured.
The Power light flashes rapidly while the Gateway restarts, then glows steadily
green when fully operational. The Internet light will also glow steadily green. The
Gateway is now configured and users can start surfing the Web.
If an error stating the Web browser was unable to connect to the Internet appears,
check the configuration settings. Ensure all the information required by the
ISP
is
entered correctly.
Changing the User Name and Password
To create or change the user name and password controlling access to the
Gateway’s Web Configuration screens, follow these instructions:
1.
From the Setup/Configuration screen, select
Admin Username/Password
from the menu on the left side.
Summary of Contents for Wireless DSL Gateway GT704WG-QW04
