MyWirelessTV
Multi-Room Wireless
HD Receiver
NEXT
Model # MWTV200R
E
Troubleshooting
D
Setting Up IR Control
(Optional)
Quick Start Guide
This Quick Start Guide will walk you through the easy steps
to set up MyWirelessTV. During this process, we’ll show you
how to connect a third HDTV to an existing MyWirelessTV
HD Transmitter.
A
How MyWirelessTV Works
B
Pair New Receiver to Existing Transmitter
C
Connect the Cables
D
Setting Up IR Control
E
Troubleshooting
You will need the following items from your MyWirelessTV kit:
•
Wireless HD Receiver
•
One (1) Power Supply
•
One (1) HDMI Cable
•
One (1) IR Extender Cable
© 2011 Actiontec Electronics, Inc. Actiontec, Actiontec Installation Buddy, Creative Solutions for the Digital Life,
and the Actiontec logo are trademarks or registered trademarks of Actiontec Electronics, Inc. in the U.S. or other
countries. All other names are properties of their respective owners.
Product photo may differ from actual product, however functionality remains as stated above.
Specifications are subject to change without notice.
FREQUENTLY ASKED QUESTIONS
1
Q
I’m not seeing anything on the TV screen near the
Transmitter.
A
Check the cable connection from the source (i.e. Cable/
Satellite Set Top Box) to the Transmitter and from
Transmitter out to the HDTV.
2
Q
My cables are connected properly, but I’m still not
seeing video on my TV screen.
A
Make sure the source device is powered on and the correct
source input is selected on your HDTV.
3
Q
I’m not seeing anything on the TV screen next to the
Receiver.
A
Check the cable connection from the MyWirelessTV
Receiver out to the HDTV. Also, make sure the correct
source input is selected on the HDTV.
4
Q
I can’t control my source device (Set Top Box, Blu-Ray
Player, etc.) from my 2nd HDTV.
A
Make sure the IR blaster sensor is pointed directly to the
source device’s IR (infrared) window. Also make sure the
Receiver or the IR Extender cable is in line-of-sight of the
remote control.
Your HDTVs and cable/satellite box should be connected as
shown in the previous diagram. You can now start enjoying
HDTV anywhere you want it!
Step
4
c
Place the
flat end
of the IR
Blaster cable in front (not directly over)
of the
remote sensor
of the
source
device
.
5
Q
I can’t change my channel or volume with the remote
control included with the MyWirelessTV Kit.
A
The MyWirelessTV remote control provided is intended
for switching multiple input, pairing configuration, and
software update. It is not a universal remote control.
6
Q
I do not see any video when I connect to my PC/
Laptop with HDMI to the MyWirelessTV.
A
Make sure the HDMI output display is selected from your
PC/Laptop. Refer to your PC/Laptop’s user manual.
7
Q
The video quality is poor.
A
You may need to adjust the orientation of the Transmitter
and Receiver. Use the Wireless Power Indicator to improve
the wireless signal between the two devices. You may
want to try orienting the Transmitter and Receiver fronts
to be pointing more directly at eachother. To learn more,
see the MyWirelessTV user manual.
Step
4
a
Get the
IR Blaster cable
from
the original MyWirelessTV Transmitter/
Receiver kit. The IR Blaster cable has a
black
connector.
Step
4
b
Plug the IR Blaster cable’s
black connector
into the
Transmit
port
on the back of the
Transmitter
.
Step
3
a
Get the
IR Extender
cable
(with the
green
connector) from the
MyWirelessTV kit.
Step
3
b
Plug the IR Extender cable’s
green connector
into the
Green port
on the back of the
Receiver
.
Step
3
c
Remove the protective covering
of the doublestick tape and attach the
flat end
of the IR Extender cable to the
front corner of the
HDTV bezel or frame
.
Part No: 0530-0665-000 QS1155/0811
CAUTION
RISK OF EXPLOSION IF REMOTE CONTROL BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
The IR Blaster and IR Receiver work together to let you control the
source device (the device to which you connected the Transmitter:
DVR, Blu-ray Player, etc.) from the Receiver location, whether it's in
the next room, or on the other side of the house. For example, if
your source device is in the living room, and you've set up your
MyWirelessTV in your bedroom, the IR Blaster/Receiver allows you
to control the source device from your bedroom.
If you are using the MyWirelessTV Kit in the same room,
the IR Blaster is not needed.
Use an
IR Extender
cable if the receiver is hidden or you want it
to be hidden. Use of this cable is optional.
You may have already installed the IR Blaster. If so, you
may skip this section.
For Technical Support call
1-888-436-0657
How to Videos, User Manuals, Wall Mount Templates, Software
Updates and other information are available Online at
https://www.actiontec.com/products/product.php?pid=219
MWTVrx_QS3_QS sngl pnl 9/13/11 4:40 PM Page 2
