Page 1
NDC-5 Configuration Guide
Guide to configuring an NDC-5
The Actisense NDC-5 is a very powerful multiplexer / router, capable of filtering, advanced filtering,
directing sentences to specific connected listeners, and auto bauding. With this guide, the user will
be able to better understand the power and capability of the NDC-5 within an NMEA 0183 network.
Connecting to the device
Full details on connecting to the web interface on the product are found within the NDC-5 User
Manual, which is downloadable from our website. For the example used here, the device is con
-
nected to a DHCP network router via an Ethernet cable.
To connect to the device, enter ‘http://ndc-xxxxxx’ into any web browser (xxxxxx is replaced by the
serial number, e.g. ndc-123456). Once the device has been connected to, the following web page
will appear:
This is the ‘home page’ for the web interface, giving an overview of product info including firmware
version, web file version, power, current operating mode selected etc...
From here, any of the different pages can be accessed using the ribbon at the top of the page.
Please note, that if this is the first time using the device, or the web cache has been cleared, then
the username and password and required.
UN = Admin, PW = Admin.
