Serial Opto Isolat
or
Quick Start Guide
OPTO-4
Issue 2.0
0
Active Resear
ch Ltd
21 Harwell Road
Poole
Dorset
UK, BH17 0GE
Tel: +44 (0)1202 746682
Email:
support
@acti-
sense.com
Introduction & Features
The Actisense EMU-1 is a specialised analogue to NMEA 2000
Gateway which converts data from analogue engine gauges/
senders into NMEA 2000 data. Please refer to the FAQs for
gauge/sender compatibility details.
The EMU-1 can monitor vital engine parameters such as
temperature, pressure RPM and fluid levels from up to two
engines.
The EMU-1 has a PC based configuration tool that allows
the settings inside the EMU-1 to be changed to best suit the
engine it is working with, making it a flexible solution for many
engine makes and models. An Actisense PC to NMEA 2000
Gateway (NGT-1) is required to configure the EMU-1.
Technical Accuracy
To the best of our knowledge the information contained in
this document was correct at the time it was produced. Active
Research Ltd cannot accept liability for any inaccuracies or
omissions.
The products described in this manual and the specifications
thereof may be changed without prior notice. Active Research
Ltd cannot accept any liability for differences between the
product and this document. To check for updated information
and specifications please check actisense.com.
Active Research Ltd will not be liable for infringement of cop-
yright, industrial property rights, or other rights of a third party
caused by the use of information or drawings described in this
manual.
Product Guarantee
This product comes with a three year ‘return to base’ guaran-
tee. If you suspect that the unit is faulty please refer to the
Troubleshooting Section of the User Manual before contacting
support.
It is a requirement of the guarantee that all installations of
electronic equipment follow the NMEA 0400 specification.
Any connection to a battery or power supply must meet the
mandatory essential safety requirements that may be im-
posed by local regulatory agencies.
Important Notices
The device to which this manual relates complies with the
Electromagnetic Compatibility requirements according to
EN60945. The unit should always be used in conjunction with
appropriately approved, shielded cable and connectors as per
NMEA 0400 to ensure compliance. A declaration of conformity
is available for download at www.actisense.com.
If the device to which this manual relates is to be installed
within five metres of a compass, please refer to the ‘Compass
Safe Distance’ section in the ‘Technical Specifications’ table.
Trademarks and Registered Trademarks
Actisense® and the Actisense logo are registered
trade
marks of Active Research Limited (Ltd). All other trade-
marks are the property of their respective owners.
The NMEA® name and NMEA logo are copyright held by the
NMEA. All uses in this manual are by permission and no claim
on the right to the NMEA name or logo are made in this manu-
al.
Fair Use Statement
The contents of this manual may not be transferred or copied
without the express written permission of Active Research Ltd.
Copyright © 2018 Active Research Ltd. All rights reserved.
Product Registration
Please register your product via the online form at:
http://www.actisense.com/product-registration/
Your product package includes a unit serial number. The serial
number is six digits long and can be found below the barcode
on the label. Your registration will assist Actisense Support to
link your product to your details, simplifying any future assis-
tance you may require.
Product Disposal
Please dispose of this product in accordance with the WEEE
Directive.
The product should be taken to a registered establishment for
the disposal of electronic equipment.
