4/22
5/22
ver. 2021/20/02
DOP_1110_A
ver. 2021/20/02
Technical manual - StepArray series
Technical manual - StepArray series
1. Introduction
StepArray column speakers ensure perfect speech intelligibility and optimal
acoustic comfort, even in noisy and reverberant venues. They are based on
the DGRC (Digital & Geometric Radiation Control) principle patented by Active
Audio.
Compared with a classic sound system in which each loudspeaker is controlled
independently, the DGRC method makes it possible to decrease the number of
channels to be controlled, thereby enhancing economic efficiency.
The StepArray range includes 6 models of column speakers, from 1m to 4m
high.
SA100P
1m high
flat area, 21m
3 channels
8
Ω
min.
SA180P
1.80m high
flat area, 40m
3 channels
8
Ω
min.
SA180S
1.80m high
10° area, 29m
3 channels
8
Ω
min.
SA250P
2.50m high
flat area, 45m
6 channels
4
Ω
min.
SA250S
2.50m high
12° area, 36m
6 channels
4
Ω
min.
SA400P
4m high
flat area, 90m
6 channels
8
Ω
min.
2. Installation of the columns
StepArray columns are mounted verticaly, usually on a wall, using the supplied
brackets. Figure 1 illustrates the steps to follow for column mounting. See also
figure 8 on page 13 for technical drawings of the brackets.
Place
the 2 brackets
on the wall
using 8mm
diameter screws
x3
x3
1
Column height
+ 5mm
2
Ensure
verticality
3
Mount the column
using the supplied
nut and screw
4
Figure 1 :
Column mounting on a wall (Important : to ensure vertically
when mounting StepArray columns)
