34
Caring for Your Meter
To avoid the meter and test strips attracting dirt, dust or other contaminants,
please wash and dry your hands thoroughly before and after the measurement.
Cleaning
1. To clean the meter exterior, wipe it with a cloth moistened with tap water or
a mild cleaning agent, then dry the device with a soft dry cloth. Do NOT
rinse with water.
2. Do
NOT
use organic solvents to clean the meter.
Meter Storage
Storage conditions: -20
℃
to 60
℃
(-4
℉
to 140
℉
), below 95% relative
humidity.
Always store or transport the meter in its original storage case.
Avoid dropping and heavy impact.
Avoid direct sunlight and high humidity.
Meter Disposal
The used meter should be treated as contaminated that may carry a risk of
infection during measurement. The batteries in this used meter should be
removed and the meter should be disposed in accordance with local
regulations.
The
meter
falls
outside
the
scope
of
the
European
Directive
2002/96/EC-Directive on waste electrical and electronic equipment (WEEE).
Caring for Your Test Strips
Storage conditions: 2
℃
to 30
℃
(35.6
℉
to 86
℉
) and below 85% relative
humidity. Do NOT freeze.
Store your test strips in their original vial only. Do not transfer to another
container.
Store test strip packages in a cool dry place. Keep away from direct sunlight
and heat.
After removing a test strip from the vial, immediately close the vial cap tightly.
Touch the test strip with clean and dry hands. Use each test strip immediately
after removing it from the vial.
