20
You have finished assembling your playground equipment.
Now go back and securely tighten all bolts and nuts before using the playground
equipment.
NOTE: Make sure to go back to check all hardware and securely tighten all
bolts and nuts before using the playground equipment.
! WARNING: Do not let children use the playground equipment until it its
properly assembled and anchor.
OPTIONAL ANCHORS
(NOTE: ANCHORS ARE NOT INCLUDED)
By anchoring your set with Ground Anchors, you will be able to move your
gym set at a future date. Either method is suitable for hard soil (clay, etc.) If
your soil is soft (sand, etc.), the corkscrew method is recommended. If you
wish to permanently secure your gym set, either type of anchor may set in
concrete. Ensure equipment is firmly anchored (cementing is usually
recommended).When equipment is cemented; do not bury the legs more than
three inches below the ground surface. This will ensure sufficient space
remains under the swinging plays. Be certain that all anchoring devices
(including concrete) are placed below the level of the playing surface or below
ground level to prevent tripping.
Corkscrew Anchors is not included
Be sure the swing set is located on level ground
Turn the corkscrew anchor into the ground until only the hooked end is above
the ground next to the leg.
Insert the hooked end into the bottom opening of the leg.
Ensure that the hooked end is secure in the leg opening.
NOTE: ANCHORING
If the swing set is set up on grounds with sandy soil condition, it must be
anchored with concrete footing(concrete not included)
Be sure the swing set is located in level ground
Dig holes around swing leg tube as shown below in drawing. As you dig down
