Turn On
Turn Off
Volume Control
Basic Operation
Press & hold START/STOP for 2 seconds
.
The unit will turn on in ‘STOP’ mode and Rate, Stroke
Count (or Check Factor) and Speed/Average Speed (or
Distance Per Stroke) will be displayed.
Press & hold START/STOP for 3 seconds.
Press INCREASE VOLUME / DECREASE VOLUME.
Volume level is displayed on the ‘Volume Level Indicator’
and the level is saved when the unit is turned off.
Congratulations on purchasing your new CoxOrb. It has been designed to be as easy as
possible to use but the following information will help you get the most from it. If you
do have any questions please email us at
queries@active-tools.com
or contact your
local distributor.
CoxOrb Platinum User Guide
(for units with P01.33 or later firmware)
Start / Stop Button
Recall / Workout Button
Stroke Count /
Check Factor
Stop / Ready
Display Button
Speed /
Distance per Stroke /
Average Speed
Decrease Volume Button
Audio / Charging
/ USB Connector
Light Sensor for Backlight
Volume Level Indicator
Split / Clear Button
Stroke Rate
Battery Level Indicator
Clock Button
Distance/Timer/Clock
Increase Volume Button
Microphone Connector
Mute Button
