background image

Installation and Commissioning Guide - Bulkhead 2 Split System

Doc. No. 9590-5011  

Ver. 1  211217

  

2

Installation and Commissioning Guide

Bulkhead Split System

Table of Contents

01. Symbols  ........................................................................................................................................... 3
02. Inspection  ....................................................................................................................................... 3

02.01.  Product Inspections   ....................................................................................................................... 3
02.02.  Codes, Regulations and Standards   ................................................................................................. 3

03.  General Information   ........................................................................................................................ 3
04.  Safety Instructions   .......................................................................................................................... 4
05.  Installation Information   .................................................................................................................. 6
06. Components  ................................................................................................................................... 7
07.  Installation Overview   ...................................................................................................................... 8
08.  Indoor Units Parts   ........................................................................................................................... 9
09.  Indoor Unit Dimensions   ................................................................................................................ 10
10.  Indoor Unit Installation   ................................................................................................................. 11

10.01.  Hang Unit   ..................................................................................................................................... 11
10.02.  Duct and Accessories Installation   ................................................................................................. 12
10.03.  Adjust The Air Inlet Direction   ....................................................................................................... 13
10.04.  Fresh Air Duct Installation   ............................................................................................................ 13
10.05.  Motor and Drainpipe Maintenance   .............................................................................................. 14

11.  Drainpipe Installation   .................................................................................................................... 15
12. Wiring  ............................................................................................................................................ 18
13.  Wiring Diagram   ............................................................................................................................. 20
14.  Test Run   ......................................................................................................................................... 21

MUST BE INSTALLED BY A LICENSED 

ELECTRICIAN

D I Y

DIY

DIY

ALL ELECTRICAL WORK 

MUST BE PERFORMED 

BY A LICENSED ELECTRICIAN

FOR COMPLIANCE WITH QUEENSLAND 

ELECTRICAL SAFETY REGULATIONS 2013

This refers to electrical works only

This manual is a controlled document which contains confidential and proprietary information. 

Distribution, modification, copying and/or reproduction are prohibited without written consent from ActronAir

Product design and specifications are subject to change without prior notice for product improvement.

READ SAFETY PRECAUTIONS BEFORE INSTALLATION

Incorrect installation due to ignoring instructions can cause serious damage or injury. The seriousness of  
potential damage or injuries is classified as either a 

WARNING

 or 

CAUTION

.

CAUTION

Failure to observe a caution may result in injury or equipment damage.

Failure to observe a warning may result death or serious injury.

WARNING

Summary of Contents for BRE-026CS

























Reviews: