background image

Installation and Commissioning Guide - Bulkhead 2 Split System

Doc. No. 9590-5011  

Ver. 1  211217

 

 

7

Installation and Commissioning Guide

Bulkhead Split System

 

Installer to ensure correct size/type that main circuit breaker and cable is installed in unit sub-mains to protect the 
sub-mains and unit wiring. 

 

Installer to ensure correctly rated residual current device (RCD) is installed as per the latest version of the AS/NZS 
3000 (also known as Australian Wiring Rules).

 NOTE

This indoor unit is designed to match only with the ActronAir outdoor unit as specified in the Technical Selection Catalogue. 
This unit is designed for use with R-32 refrigerant only.
The unit is supplied with factory charged R-32 refrigerant. Be aware of all the relevant regulations concerning the handling of 
refrigerant.

06.  Components

The air conditioning system comes with the following components. Use all of the installation parts and accessories 
to install the air conditioner. Improper installation may result in water leakage, electrical shock and fire, or cause the 
equipment to fail. The items are not included with the air conditioner must be purchased separately.

Name

Quantity

Illustration

Tubing & Fittings

Soundproof / Insulation Sheath

2

  

Seal  Sponge

1

Wired Controller

Wired Controller

1

Wired Controller Screws

2

Refrigeration Fittings

Nut

2

Filters

Magnetic Ring

1

Air Filter

1

Manuals

Wired Controller Manual

1

Owner‘s Manual

1

Owner's Manual

That’s better. That’s Actron.

MultiElite 2
Multi Split System Air Conditioner

IMPORTANT NOTE:

Please read this manual carefully before installing or operating your air conditioning unit. Make sure to save this manual for 
future reference.

Model Numbers

BRE-026CS
BRE-035CS
BRE-050CS
BRE-070CS

CAUTION:

The system is charged with flammable refrigerant, safety checks are necessary to ensure that the risk of ignition is minimised.

Installation Manual

1

Installation and Commissioning Guide

That’s better. That’s Actron.

CAUTION:

Outdoor unit is charged with flammable refrigerant, safety checks are necessary to ensure that the risk of ignition is minimised.

IMPORTANT NOTE:

Please read this manual carefully before installing or operating your air conditioning unit. Make sure to save this manual for 
future reference.

Model Numbers

BRE-026CS
BRE-035CS
BRE-050CS
BRE-070CS

Bulkhead 2
Split System Air Conditioner

Installation and Commissioning Guide

Summary of Contents for BRE-026CS

























Reviews: