Page 9
2. Drill 4 holes 5cm deep at the ceiling hook positions in the
internal ceiling. Be sure to hold the drill at a 90° angle to
the ceiling.
3. Using a hammer, insert the ceiling hooks into the
pre drilled holes. Secure the bolt using the included
washers and nuts.
4. Install the four suspension bolts (See Fig. 4.4).
Fig. 4.4
1. Use the included paper template to cut a rectangular hole in the ceiling, leaving at least 1m on all sides.
The hole will be 88 x 88cm big. Be sure to mark the areas where ceiling hook holes will be drilled.
4. Indoor Unit Installation
Super Slim Four-Way Cassette
Hang Indoor Unit
Fig. 4.3
Refrigerant piping side
Drain hose side
68cm
(Suspension bolt)
84cm (Body
)
95cm (Ceiling opening
)
>1m
>1m
>1m
>1m
CAUTION
The unit body should align perfectly with the hole.
Ensure that the unit and the hole are the same size
before moving on.
95cm (grille for fascia)
84cm (Body)
78cm (Suspension bolt)
Summary of Contents for Cascade CRE-071AS
Page 39: ...Page 39 ...