10
CP05 - CP10 Control Interface Insert
Doc. No.0525-035
Ver. 6 220307
CP05 & CP10 CONTROL INTERFACE INSTALLATION GUIDE
Electrical Panel
Control Interface # 2
Remote Mimic Control
CP10 or CP05
(
To be Purchased Separately
)
CP10 Control Interface # 1
Master Control
(
Supplied & Fitted as Standard
)
RX+ / TX+
19
RX- / TX-
20
+Vdc
21
GND
22
6 Core (3 Pair) Twisted Pair 7/0.20 (AWG24)
Shielded Data Cable 200 Max. Length - Field Scope
(
Installer to Provide
)
6 Core Flat 7/0.12 (AWG28) Telephone Cable
50m Max. Length - Field Scope
(
Installer to Provide
)
-- or --
uPC Controller
(
Supplied & Fitted as Standard
)
Esc
Prg
Return Temp:
23.7
o
C
16.5
o
C
Supply Temp:
Comp
Rev Vlv
9:30 Unit: On Auto
Esc
Prg
Return Temp:
23.7
o
C
16.5
o
C
Supply Temp:
Comp
Rev Vlv
9:30 Unit: On Auto
*
CP05 or CP10 may be used as Secondary Control Interface.
Refer Control Interface mounting procedure on pages 6-8.
1.2 uPC Control Connection Lay-out (For uPC Controller only)
Please refer to Wiring Diagram provided with your unit for wiring details specific to your requirements.
The Dual Control Connection Lay-out below is provided as a guide only.
