26
Operation Manual - Hercules CP10 Commercial Control Interface
Doc. No. 0525-022
Ver. 5 190314
DAYLIGHT SAVING TIME DISABLE
Display Progression
C. Mode of Operation
B. Setpoint
Main Menu D
D. Clock / Scheduler
Clock D2
DST: ENABLE
Transition time: 60 min
Start: FIRST SUNDAY
in OCTOBER at 2.00
End: FIRST SUNDAY
in APRIL at 3.00
Clock D2
DST: ENABLE
Transition time: 60min
Start: FIRST SUNDAY
in OCTOBER at 2.00
End: FIRST SUNDAY
in APRIL at 3.00
Clock D2
DST: DISABLE
Transition time: 60min
Start: FIRST SUNDAY
in OCTOBER at 2.00
End: FIRST SUNDAY
in APRIL at 3.00
Step 1
Step 2
Step 3
Step 4 (DISABLE)
Clock D2
DST: DISABLE
Transition time: _ ---
min
Start: --- --- ---
in --- --- --- at --- .00
End: --- --- ---
in --- --- --- at --- .00
C. Mode of Operation
B. Setpoint
Main Menu D
D. Clock / Scheduler
A. On / Off Unit
B. Setpoint
Main Menu A
C. Mode of Operation
Step 5
Step 6
Notes
: 1. Use the
“ ”
or “ ”
Button to toggle on all of the
D. Clock
sub-menu functions.
2. The programmed Day Light Saving Time parameters will be retained for next
time Day Light Saving Time is enabled.
1. From the main menu, scroll down
into
D. Clock / Scheduler
sub-
menu following the procedures from
Setting the Clock section.
2. Press
“ ”
Button to scroll down into
Daylight Saving Time
sub-menu.
3. Press
“ ”
Button to lock-in
Daylight
Saving Time
sub-menu
and the
cursor
“ ”
will appear on "ENABLE"
indicator.
4. Press
“ ”
or “ ”
Button to select the "
DISABLE
" Daylight Saving Time function.
Note
: The segment will change from "
ENABLE
" to "
DISABLE
".
5. Press
“ ”
Button to disable the
Daylight Saving Time
function. The cursor will disappear and
the "DISABLE" sub-menu screen will be displayed.
TO RETURN TO THE MAIN MENU
6. Keep
pressing
“
Esc
”
(Escape/Return) Button until you get to the Main Menu screen. Otherwise
press
“
Prg
”
Button.
Esc
Prg
Clock
DST: DISABLE
Transition time: 60min
Start: FIRST SUNDAY
in OCTOBER at 2.00
End: FIRST SUNDAY
in APRIL at 3.00
