Operation Manual - LR7 Wall Control
Document: 0525-075
Ver. 2 190912
Operation Manual
LR7 Wall Controller
17
7. Repeat the above steps until you have programmed all the events you require. Otherwise, press the
EXIT
button twice to exit Program Menu.
TIME CLOCK
display will show on the screen to indicate that it is
active.
NOTE
If a button has not been pressed after 60 seconds the controller will exit the Time Clock program menu and
return to the home screen. During a power failure, the controller will retain the time and time clock settings.
13.01.05. Repeating a Day’s Events and Times
This feature allows you to automatically repeat the previous days, events, and times, into the succeeding days.
1. Proceed to the day you wish to copy the programmed events and times. See Programming the Events
from previous page.
SET
,
EVENT 1
,
TIME CLOCK
and
ON
will be illuminated in the screen.
NOTE
For this example, events from Monday will be repeated on Tuesday.
Repeat function can only be applied to the succeeding day with programmed events.
2. Press the
PROG
button until you reach
the succeeding day,
TUE
, to paste the copied
programmed events and times.
3. Press the
REPEAT
button.
