Installation and Commissioning Guide
Package Commercial Unit
3
Installation and Commissioning Guide - Package Commercial Unit
Doc. Part No. 0525-055 Ver. 9 220308
01. Inspections
01.01. Information About This Guide
This guide provides installation instructions, specific to your package unit. Read this manual thoroughly and take into
consideration all specifications and instructions to ensure correct installation and safe operation of your air conditioning
system.
NOTE
Keep this document for future reference. Ensure all technicians that work on the unit can refer to this manual at any time.
01.02. Product Inspections
Check your air conditioning unit and all items against the invoice upon receiving your shipment. Inspect the unit,
components and accessories for any sign of damage. If there is any damage to the unit, contact ActronAir Customer
Care Department immediately on:
1300 522 722
to obtain a Goods Return Number.
Check the unit nameplate to verify the model, serial number and electrical rated specifications are correct.
01.03. Codes, Regulations and Standards
The installer and/or contractor assumes responsibility to ensure that unit installation complies with the relevant council,
state / federal codes, regulations and building code standards. All electrical wiring must be in accordance with current
electrical authority regulations and all wiring connections to be as per electrical diagram provided with the unit.
01.04. Important Safety Symbols And Labels
Safety Symbols and labels appear at appropriate sections throughout this manual to indicate immediate or potential
hazards. Pay full attention and comply to the safety information and instructions. Failure to follow safety instructions
increases the risks of personal injury, death and/or property damage. Damages to the product as a result of such failure
may void warranty.
ActronAir has endeavored to provide sufficient safety warnings and recommendations, however current and prevailing
WH&S regulations must be observed and will take precedent whenever performing the installation instructions discussed
in this manual.
02. General Information
The ActronAir air conditioning units are designed for applications where superior performance, high efficiency,
reliability, supply air quality and quiet operation are the prime priorities. The units are built with the latest technology,
advanced variable speed driven compressor, EC indoor fans, low-noise outdoor fans and an intelligent electronic
control.
For optimum efficiency, your air conditioning unit will deliver just the right amount of cooling or heating capacity you
demand. Even in extreme conditions, the unit will still supply the required demand at peak performance.
Energy Efficient Refrigeration Circuits
The ActronAir air conditioning system is designed with a highly efficient refrigeration circuit that delivers only the
amount of cooling or heating actually required to maintain your desired comfort at the most optimum efficiency.
The refrigeration circuit consists of:
• High efficiency scroll compressor
• Hydrophilic coated condenser coil designed for optimum performance and efficiency with corrugated fins and riffled
tubing
• Hydrophilic coated evaporator coil designed for optimum performance and efficiency with lanced fins and riffled
tubing
