Operation Manual - Serene 2 Remote Controller
Document: 9590-4010
Ver. 1 200819
Operation Manual
Remote Controller
10
1. While the unit is OFF, press the
button until timer indicator is shown.
2. Press the
or
buttons
to adjust the time.
3. Point the remote controller to the indoor unit and wait for 1 second. The indicator will show, means that the
function is activated.
4. Press the
button until timer indicator is shown.
5. Press the
or
buttons
to adjust the time.
OFF Indicator
6. Point the remote controller to the indoor unit and wait for 1 second. Both the and indicators will show,
means that the function is activated.
NOTE
When setting the TIMER, the adjustable increment is 30 minutes up to 10 hours. After 10 hours the increment will be 1
hour up to 24 hours.
NOTE
Indoor unit must show
on
or
OF
when button is pressed. If this does not happen timers will show as set on remote
control but will not function on the unit.
