background image

Operation Manual - Serene 2 Remote Controller

Document: 9590-4010  

 Ver. 1 200819

Operation Manual

Remote Controller

8

Timer  OFF (Auto-OFF Operation)

The TIMER OFF feature is useful when you want the unit to turn off automatically at desired time.

Example:

To turn OFF the air conditioner in 10 hours.

Stop

On

Set             10 hours later

 

1.  While the unit is ON, press the

 

 button twice until timer   indicator is shown.

2.  Press the 

 or 

 buttons

 to adjust the time.

3.  Point the remote controller to the indoor unit and wait for 1 second. The   indicator will show in remote 

controller and 

 in the indoor unit panel to indicate that this function is activated.

OFF Indicator

Combined Timer (Setting both ON and OFF timers simultaneously)

TIMER OFF  

 TIMER ON (On Stop-Start operation)

This feature is useful when you want to stop the air conditioner after you go to bed, and start it again in the morning 
when you wake up or when you return home.

Example:

To stop the air conditioner 2 hours after setting and start it again 10 hours after setting.

On

Stop

2 hours later

after setting

Set

Start

10 hours later

after setting

Summary of Contents for Serene 2 RC-02

















Reviews: