5
DoorLIFT DL
-
6
Remote door system
2.2 Ensure adequate clearance above door
Check to ensure you have enough clearance above the open door to
allow the top edge of the door to go through the radius. Make sure
there is a minimum of 45mm between the door and the ceiling.
Check if you are using the right type of top closure arm for you door
(see section 2.3 below).
If there isn
’
t enough clearance contact your shutter door supplier to
enquire whether the track can be modified to allow installation of
the DoorLIFT.
2.3 Checking the top roller brackets
Make sure that the right type of top closure arm is installed on your
door to be sure that the door closes in the right way. You will need
an adjustable type with two rollers to give the best result.
This also will give you a better clearance between the door and the
ceiling.
If you have any doubts, please contact your shutter door supplier
for assistance.
Installation guide
