10
recorded values, press and hold the “
” button for 5 seconds. Dashes display
to confirm you have cleared the MIN records.
To view the MAX records, press the ”
“ button. The MAX icon appears next
to the low records. To manually clear all of today’s MAX recorded values,
press and hold the ”
” button for 5 seconds. Dashes display to confirm you
have cleared the MAX records.
Troubleshooting
No outdoor sensor
reception
no bars
If the wireless signal indicator shows no bars:
• Relocate the display unit and/or the outdoor sensor. The
units must be within 330 ft (100 m) of each other.
• Make sure both units are placed at least 3 feet (.9m)
away from electronics that may interfere with the
wireless communication (such as TVs, microwaves,
computers, etc).
• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It
may take up to 20 minutes for display unit and sensor to
synchronize after batteries are replaced.
Display screen
not working
• Check that the batteries are installed correctly. Batteries
may need to be replaced.
• Reset display by pressing the RESET button, located on
the back of the display unit. Date and time will need to
be entered after a reset.
Outdoor
temperature
is flashing or
showing dashes
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. Bring both the sensor and display unit indoors and
remove at least one battery from each.
2. Make sure the A-B-C switch on both units match.
3. Reinstall the battery in the outdoor sensor.
4. Reinstall the battery in the display unit.
5. Let the units sit within a couple feet of each other
for about 20 minutes to gain a strong connection.
Sometimes changing to a different channel can help.
Summary of Contents for 13230
Page 14: ...14 ...
