background image

Unpacking Instructions 

Remove the protective film that is applied to the screen prior to 

using this product. Peel off to remove.

Package Contents 

1. Thermometer 

2. Battery (pre-installed) 

3. Instruction Manual

Activate Thermometer

A.   Lift rubber seal on bottom of unit to 

expose ON/OFF switch.

B.   Slide ON/OFF switch to the “ON” 

position.

C.  Push rubber seal firmly into its original  

  position to seal the unit. 

Placement for Maximum Accuracy 

AcuRite products are sensitive to surrounding environmental 

conditions. Placement in a proper location is critical to the accuracy 

of this product. To ensure accurate temperature measurement, place 

out of direct sunlight and away from heat sources. 

Window Mount 

Clean the area where the suction cup will be adhered to with a 

household window cleaner. Be sure window is free of oil, grease, 

dust or other matter. Moisten the suction cup. To mount, push firmly 

on the thermometer, pressing it against the window to form a strong 

suction. For best suction, select surface that is hard, smooth and 

non-porous. Do not use suction cups on wood or plaster. 

Instruction Manual

Window Thermometer

model 00799

PRODUCT REGISTRATION

Register online 

 to receive 1 year 

 warranty  protection

www.

AcuRite

.com

IMPORTANT

PRODUCT MUST BE REGISTERED 

TO RECEIVE WARRANTY SERVICE

Register a Product

Limited One Year Warranty

At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all 

products it manufactures to be of good material and workmanship, and to be free of defects when properly installed 

and operated for a period of one year from the date of purchase. 
We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product 

registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty 

benefits.

Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and 

operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any 

product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney, 

and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby 

disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures 

which have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired 

or altered by others than authorized representatives of Chaney.
The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including 

without limitation the implied warranty of merchantability and the implied warranty of fitness for a particular purpose. Chaney expressly disclaims all liability for 

special, consequential or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or 

limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury 

relating to its products to the extent permitted by law. By acceptance of any of Chaney’s products, the purchaser assumes all liability for the consequences arising from 

their use or misuse. No person, firm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products. Furthermore, no 

person, firm or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly 

authorized agent of Chaney. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For in-warranty claims:  

Chaney Instrument Co.  |  965 Wells St.  |  Lake Geneva, WI 53147

SAVE THIS MANUAL FOR FUTURE REFERENCE.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN EN-

VIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR 

LOCAL LAWS AND REGULATIONS. 

BATTERY SAFETY: Follow the polarity (+/-) diagram in 

the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of 

the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in 

fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use 

rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals. Battery contains 

mercury. Do not put in trash. Recycle or manage as hazardous waste.

Questions?

 Contact Customer Support at 

(877) 221-1252 or visit www.

AcuRite

.com.

Congratulations on your new AcuRite product. To ensure the best 

possible product performance, please read this manual in its 

entirety and retain it for future reference.

Features & Benefits

1.  Current Temperature 

 

Displayed in degrees 

 Fahrenheit.

2. Suction Cup Mount 

 

Easily mounted on a window.

3. ON/OFF Switch 

 

With weather-resistent seal.

Specifications

TEMPERATURE RANGE

-4°F to 158°F

POWER

Button cell L1154

1

2

3

Replace Battery

A.  Remove the 2 small screws near the  

  display on top of the unit with a  

  small phillips screwdriver. 

B.   Access the battery compartment by 

gently separating the upper and 

lower halves of the unit.

C.   Pull the clear strip outward to 

remove the old battery.

D.   Replace battery with a new button 

cell type L1154. 

F.  Firmly push together the two halves of the unit. 
F.   Replace the 2 screws.

Printed in China

00799 INST 083112

Reviews: