DVR User Manual
17
4.2.3 Spot
Step 1:
Enter into System Setup
Live
Spot. Refer to Fig 4-9:
Fig 4-9 Live Setup-Spot
Step 2:
Select Display Mode: 1×1 and map the channel.
Step 3:
Set the dwell time. Click
button to set the previous channel, click
button
to set the latter channel.
Step 4:
Select the display mode and setup current picture group.
Step 5:
Click „Apply‟ button to save the settings.
4.2.4 Mask
If there is something you don‟t want to display in the live image. You can set mask. For a
given channel a maximum of three areas can be masked.
To setup mask area:
Step 1
: Enter into Menu
Setup
Live
Mask interface.
Fig 4-10 Live Configuration-Mask
Step 2
: Click Setting button to go into live image.
Step 3
: Press and drag the left mouse button to set mask area as shown below.
Summary of Contents for Ai-T40
Page 16: ...DVR User Manual 11 Fig 3 3 Live Playback...
Page 70: ...A0...
