9CH Mobile NVR Manual
34
1.3-6 Post-alarm Recording
Post-alarm recording records the video of a camera after a particular alarm/motion is triggered.
This can be set between 1-100 seconds.
1.3-7 Pre-alarm recording
Pre-alarm recording can record the video of a camera before a particular alarm/motion is
triggered. To enable pre-alarm recording, turn the option on.
1.3-8 Weighted recording
When weighted recording is activated, the standard camera recording frame rate is
increased to the pre-determined rate (set in advance recording), once an alarm is detected
by
SVR
. Without an alarm the camera will record at 4FPS.
1.3-9 Schedule table
The schedule table is displayed as hourly intervals 7 days a week. You can chose whether
you want the
SVR
to record constantly (always), on an alarm event (alarm) or not record (no
record). Your chosen method is indicated by a colour code on the time/date grid.
1.3-10 HDD overwritten
The
SVR
can be setup for HDD overwrite. If the user does not want the HDD to be overwritten,
turn the option off.
Warning:
The schedule table is a universal table and changes will apply to all cameras on the
SVR
.
