9CH Mobile
SVR
Manual
36
1.4-5 Motion area setup
There are a number of ways to set the motion detection area. The detailed setting sequence is
described as follows:
Keypad
Keyboard
Remote
controller
Mouse
Step 1
Enter Motion Area Set menu item.
Step 2
Press Up, Down, Left, or Right to move cursor
Move mouse for starting position
Step 3
Press Enter to define starting area
Step 4
Press Enter again to finish a motion detection zone
Mouse-drag for an area
Step 5
To clear motion zones press Menu button
Double-click for clear motion zones
Step 6
Press ESC for exit the setting menu
Move mouse to “X” icon and press Left-
mouse click to exit motion zone setting
Red indicates motion area
1.4-6 Alarm time
Set the period of time 1-100 seconds the alarm output relay is triggered upon an alarm event.
1.4-7 SMTP setup
SVR
is capable of sending JPEG snapshots to an email account when an alarm event is
triggered. To enable this feature, you must type in the relevant email account information.
1.4-8 FTP setup
The
SVR
is capable of alarm snapshot to an FTP server. To enable this feature, you must type
in the relevant FTP account information.
1.4-9 Buzzer timer
Select a time period you wish the buzzer (on
SVR
) to sound for upon an alarm trigger. This
can be set between 1-100 seconds, it can be set to always or off as required.
