9CH Mobile NVR Manual
37
1.4-10 Buzzer enable
Turns the audible warning buzzer (on
SVR
) on or off
1.4-11 Button sound
Enables or disables button sounds on
SVR
1.5 Network setup
In order to connect the
SVR
to LAN or the Internet you require subnet mask, gateway and IP
address. Consult your system administrator for more information.
It is highly recommended that NVR’s are accessed on a high bandwidth network such as
Gigabit LAN.
1.5-1 IP mode
Set the
SVR
to Static, DHCP, and PPPoE IP modes. It is highly recommended that NVR’s are
accessed on high bandwidth network such as Gigabit LAN’s.
1.5-2 IP address
Enter the IP address for the
SVR
using the virtual keyboard
1.5-3 Subnet mask
Enter the Subnet Mask for the network using the virtual keyboard
1.5-4 gateway
Enter the Gateway address for the network using the virtual keyboard
1.5-5 Default DNS
Enter the Default DNS address for the network using the virtual keyboard
