Chapter 4: BIOS Setup
Serial Port 1 Configuration
This section is used to configure serial port 1.
Serial Port 2 Configuration
This section is used to configure serial port 2.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Advanced
Serial Port 1 Configuration
Enable or Disable Serial Port
Serial Port 2 Configuration
Enable or Disable Serial Port
(COM)
(COM)
Serial Port
[Enabled]
Serial Port
[Enabled]
Device Settings
IO=248h; IRQ=5;
Device Settings
IO=2F8h; IRQ=3;
Onboard Serial Port Mode
[RS232]
Onboard Serial Port Mode
[RS232]
Terminal resistor
[Enabled]
Terminal resistor
[Enabled]
→←: Select Screen
→←: Select Screen
↑↓: Select Item
↑↓: Select Item
Enter: Select
Enter: Select
+/-: Change Opt.
+/-: Change Opt.
F1: General Help
F1: General Help
F2: Previous Values
F2: Previous Values
F3: Optimized Defaults
F3: Optimized Defaults
F4: Save & Exit
F4: Save & Exit
ESC: Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Serial Port
Enables or disables the serial port.
Onboard Serial Port Mode
Select this to change the serial port mode to RS232, RS422, RS485 or
RS485 Auto.
Terminal Resistor
Enables or disables the terminal resistor.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Serial Port
Enables or disables the serial port.
Onboard Serial Port Mode
Select this to change the serial port mode to RS232, RS422, RS485 or
RS485 Auto.
Terminal Resistor
Enables or disables the terminal resistor.
35
StockCheck.com