AcuPanel15C1DV2 ( Model #ACUPNL15CD ) Manual
14
7. 5. Custom Settings (EloOptions.ini)
Some settings can be applied right after setup is complete. Users can use this feature to set certain
parameters using EloOption.ini which is located in the same location as other executables.
Currently, settings below can be customized in EloOptions.ini. These settings will be applied at the end of
EloSetup.
7.5.1
APR performance preference.
7.5.2
Cursor Edge Acceleration (for system with single touch monitor only).
Chapter 8 AMI BIOS SETUP
Your computer comes with a hardware configuration program which called BIOS Setup that allows you to
view and set up the system parameters.
The BIOS (Basic Input / Output System) is a layer of the software called ‘firmware’ which translates
instructions from software (such as the operating system) into instructions that allow the computer
hardware to understand the software programs. The BIOS settings also identify installed devices and
establish many special features.
ENTERING BIOS SETUP
You can access the BIOS program just after you turn on your computer. Just press the “DEL” key when
the following prompt appears:
Press <DEL> to enter Setup.
When you press <DEL> to enter the BIOS Setup image, the system interrupts the
Power-On Self-Test (POST).
