PowerBrick 5.0 CV-i7 Quick Guide
Acura Embedded Systems Inc. Updated in Nov 28/13
•
When Main Power Switch (on the front plate) is on (pilot LED is “Blue“ ) and
power supply is normal.
•
When Main Power Switch is standby (pilot LED is “Red“ ) and power supply is
normal.
•
There are four
status
LED (on the front plate) is shown diferent colors as
following.
1. If
ACC Status
LED lit “ Green “,it indicates that Ignition is off and power
supply is normal.
If
ACC Status
LED lit flash "Green",it indicates that Ignition is on.
2.
UPS Status
LED lit “ Red“ indicates that UPS (Optional Feature) is on.
3.
HDD Status
LED lit flash “ Red
“
indicates hand drive proper operation
and health.
4.
WWAN
Status
LED lit flash “ Green
“
indicates WWAN connecting proper
operation and health.
7. INSTALLATION OF SURVEILLANCE SOFTWARE
Insert CDROM or open PowerBrick CV Driver Folder "AcuraVision-Kit1.6b",
Press [
setup
]
Button to start up acuraVision installation program, Please wait until the
following dialogue appears. Please press [
Next
] button to proceed.
With the unique set of products, Acura Embedded Systems remains committed to its
goal of providing trouble-free and customer-friendly service. A special customer service
unit has been set up specifically to cater to our esteemed customers' needs.
Technical Support:
For
technical support contact your
Salesperson
Mailing address:
Acura Embedded Systems Inc.
Unit #1, 7711-128th Street, Surrey, BC V3W 4E6, CANADA
Ph: (604) 502-9666 Fax: (604) 502-9668
Toll Free 1-866-502-9666
6
