[Setup]
F1_EXE="c:\windows\explorer.exe"
F1_PARA=""
F1_PATH=""
F2_EXE="C:\Program Files\Windows Media Player\wmplayer.exe"
F2_PARA="/prefetch: 1"
F2_PATH=""
F3_EXE="C:\WINDOWS\system32\osk.exe"
F3_PARA=""
F3_PATH=""
F4_EXE="C:\WINDOWS\system32\taskmgr.exe"
F4_PARA=""
F4_PATH=""
F5_EXE="C:\WINDOWS\system32\mspaint.exe"
F5_PARA=""
F5_PATH=""
The configuration file is located under drive C: root directory as
"c:\FKeySet.txt"
Barcode Buttons (F1 / F4)
Please press F1 or F4 function keys to trigger to scan the barcode when the optional
barcode scanner snap-on module is installed.
If your system does not have this module, these buttons can be programmable to
execute specific software application. When you program your application, please write
this directory as listed below into your configuration file, then the system will aware and
execute this application.
F1_EXE="c:\windows\explorer.exe"
F1_PARA=""
F1_PATH=""
F4_EXE="C:\WINDOWS\system32\taskmgr.exe"
F4_PARA=""
F4_PATH=""
Accessory Door
By removing the four screws on top side of the system, allows you to install optional snap-
on module.
External Battery Connector
To install the External Battery, please remove the cover of external battery connector before
snap the battery pack into the external battery connector.
Speaker
Integrated stereo speaker for sound and audio output for your multimedia
presentations or listening pleasure.
Protective Rubber
To prevent system harm from vibration or shock, the system is designed with installing
protective rubber on both sides.
3.5mm Headphone Jack
Allows you to connect an external stereo headphone with MIC for personal listening and
sound recording.
USB Ports
The two USB type-A ports allows you to connect USB 2.0-compliant devices (for
example, mouse, keyboard and so on) to your Tablet PC.
Ethernet port
The 10/100Mbps Ethernet port allows you to connect to other computers/networks through a
local area network (LAN) via a mini-USB to RJ45 adapter cable provided in the accessory
box.
Power Button
Switch the computer power on and off, or resumes whenever it is in Suspend mode (by OS
define).
Lock Button
To prevent the screen or function keys have been touched accidentally. The screen will
appear
Lock
message.
To make the system back to work, press the Lock button again to disable the lock
function, the screen will appear
Unlock
message.
RF Button
Press this button to enable or disable power of the Wi-Fi, Bluetooth or 3G devices.
When you press the RF Button, the screen pops-up the option list for your selection.
You can see all functions in this option list have been ticked. To close any function, please
touch the option to close the execution as shown in the following graphics.
Disable Wi-Fi function Disable Bluetooth function Disable 3G function
4
5
