background image

© 2011 American Honda Motor Co., Inc. - All Rights Reserved.

BII 46293 (1108)

1 of 4

INSTALLATION
INSTRUCTIONS

Accessory

Application

Publications No.

Issue Date

AUG 2011

08L03-TA1-2000-91

2012 TSX

SPORT WAGON

SKI

ATTACHMENT

P/N 08L03-TA1-200A

PARTS LIST

2 Ski attachments

4 Knobs

4 Long T-bolts

BII 46293

1.

Pull open the end cap on each crossbar.

Put this information in the glove box with the vehicle owner's manual.

INSTALLATION

NOTE:

• The ski attachments are designed to be used

exclusively with Acura cross bars, which are sold
separately. If the vehicle is not equipped with cross
bars, install the recommended cross bars before
installing the ski attachment.

• The ski attachments may be installed with both on

the driver's side, or with both on the passenger's
side.

2.

Remove the rubber moldings from the front and
rear crossbars. Retain the rubber moldings to be
installed later.

4 Block spacers

Key

3.

Slide two bolts into each crossbar (front and rear).
Close the end caps.

FRONT 

CROSS BAR

REAR 

CROSS BAR

RUBBER 

MOLDING

FRONT

CAP

Open.

RUBBER MOLDING

Slide.

FRONT 

CROSS BAR

BOLT

FRONT

Summary of Contents for 08L03-TA1-200A

Page 1: ... attachments are designed to be used exclusively with Acura cross bars which are sold separately If the vehicle is not equipped with cross bars install the recommended cross bars before installing the ski attachment The ski attachments may be installed with both on the driver s side or with both on the passenger s side 2 Remove the rubber moldings from the front and rear crossbars Retain the rubbe...

Page 2: ...to click into position then turn the key counterclockwise to lock the top frame 8 Rock the ski attachments in all directions to make sure they are installed securely If necessary retighten the T bolts or reinstall the ski attachments 9 To prevent excess wind noise cut each rubber molding and install the cut pieces into the grooves in the crossbars 10 Write down the key number to be put it in a saf...

Page 3: ...cle 1 Insert the key then turn it clockwise to unlock the top frame Push the button then raise the top frame completely 2 Position the skis on the attachment Load with the rear of the skis facing forward and the bindings between the front and rear attachments If the bindings cannot be positioned between the front and rear attachments install the skis with one of the bindings positioned behind the ...

Page 4: ...ck 2D24040M SKI ATTACHMENT Rock the ski attachment in all directions to make sure it is installed securely SKI SKI 4 Lock the top frame by turning the key counterclockwise Remove the key 5 With the ski attached rock the attachment in all directions to make sure it is installed securely Adjust as necessary ...

Reviews: