AEVU-751-X86 User Manual
3.1 Installation Precautions
When installing the AEVU-751-X86, please follow the precautions listed below:
•
Read the user manual
: The user manual provides a complete description
of
the AEVU-751-X86, installation instructions and configuration options.
•
DANGER! Disconnect Power
: Power to the AEVU-751-X86 must
be
disconnected during the installation process, or before any attempt is
made to access the rear panel. Electric shock and personal injury might
occur if the rear panel of the AEVU-751-X86 is opened while the power cord
is still connected to an electrical outlet.
•
Qualified Personnel
: The AEVU-751-X86 must be installed and
operated
only by trained and qualified personnel. Maintenance, upgrades, or repairs
may only be carried out by qualified personnel who are familiar with the
associated dangers.
•
Mounting
: It is advisable at least two people assist with mounting the
AEVU-751-X86.
•
Air Circulation
: Make sure there is sufficient air circulation when installing
the AEVU-751-X86. The AEVU-751-X86’s cooling vents must not be
obstructed by any objects. Blocking the vents can cause overheating of the
AEVU-751-X86. Leave at least 5 cm of clearance around the AEVU-751-
X86 to prevent overheating.
•
Grounding
: The AEVU-751-X86 should be properly grounded. The
voltage
feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label
attached to the back of the AEVU-751-X86.
3.2 External Peripheral Interface Connectors
Table
204H204H
3-1
lists the external interface connectors on the AEVU-751-X86.
Detailed
descriptions of the connectors can be found following the table.
Page 9
