AEVU-751-X86 User Manual
3.2.4.2 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1:
Align the connectors.
Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the AEVU-751-X86. See
Figure
214H214H
3-8
.
Figure 4-8: LAN Connection
Step 2:
Insert the LAN cable RJ-45 connector.
Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.
3.3 Mounting the System
WARNING!
When mounting the flat panel PC onto an arm, onto the wall or onto a
panel, it is better to have more than one person to help with the installation
to make sure the panel PC does not fall down and get damaged.
Page 15