10
Using The Projector
The projector can be rotated to project the time, indoor temperature, or
outdoor temperature on a wall or on the ceiling.
Press the projector power button “
” to turn the projector ON/OFF.
Press the “ ” button to flip the projection image 180º for use on a ceiling
or wall.
Press the “ “ button, located on the left side of the display, to select the
information you want to be projected:
CURRENT TIME
INDOOR TEMPERATURE ( )
OUTDOOR TEMPERATURE ( )
Press the color selection button (
) to choose between a RED or AMBER
projection.
If the projected information is hard to read or blurry, use the “FOCUS” dial on
the back of the projector to make the projected image clearer.
NOTES:
• Do not stare into the projector lens directly!
• Do not touch the projector lens.
• Some rough surfaces will not display the projection clearly.
Display Backlight
Display backlight has 6 brightness levels: 100% (default), 70%, 50%, 30%,
10% and 5%. The backlight will be ON 100% intensity by default, you may
adjust the backlight using the dimmer control buttons located on the back of
the unit.
BATTERY POWER NOTE: The display unit is intended to be plugged in during
use with included AC power adaptor; batteries are optional for maintaining
settings in case of a power outage. Please note that to conserve backup
battery power, the projector and display illumination only activate momentarily
for 10 seconds at a time when the unit is powered by batteries alone. The
display dimmer option is only available when the unit is plugged in.
Summary of Contents for 13020
Page 15: ...15...
