AcuRite 13020, Instruction Manual

7

Intelli-Time

®

 Clock

Intelli-Time clock and calendar are pre-programmed to the correct time and 

date, and update automatically for Daylight Saving Time. All you need to do is 

select your time zone using the “ZONE” button.

Set the Time, Date & Language

Press and hold the “ ” button, located on the right side of the display, to 

enter SET MODE. Once in set mode, the preference you are currently setting 

will blink on the display.
To adjust the currently selected (flashing) item, press and release the “    ” or 

“    “ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “ ” button to adjust the next 

preference. The preference set order is as follows:
LANGUAGE (English or French) 

TIME ZONE (PST MST CST EST AST HAST AKST) 

AUTO DST (Automatically adjust time -/+ on DST dates) 

CLOCK HOUR 

CLOCK MINUTE  

CALENDAR MONTH 

CALENDAR DATE 

CALENDAR YEAR
You will automatically exit SET MODE if no buttons are pressed for 5 seconds. 

Enter setup mode at any time by pressing the “ ” button.

Manual Clock Quick-Adjust

Self-timed clocks may drift by a few minutes over time. You can adjust the time 

using the “Quick Adjust” feature.

To access “Quick Adjust” mode, press AND HOLD the “    ” OR “    ” buttons 

for at least 8 seconds. The minutes will flash to indicate they can be adjusted.

Press the “    ” or “    ” buttons to adjust the minutes. After 3 seconds of 

inactivity, any adjustments will be saved and the clock will return to normal 

operation.