AcuRite 13020, Instruction Manual

8

Alarm Clock Placement 

Place alarm clock in a dry area free of dirt and dust. To help ensure 

an accurate indoor temperature measurement, be sure to place the 

display away from heat sources or vents.

Outdoor Sensor Placement 

Sensor must be placed outside to observe outdoor conditions. 

Sensor is water resistant and is designed for general outdoor use, 

however, to extend its life place the sensor in an area protected 

from direct weather elements.

Hang the sensor using the integrated hang holes or hanger, or by 

using string (not included) to hang it from a suitable location, like a 

well covered tree branch. The best location is 4 to 8 feet above the 

ground with permanent shade and plenty of fresh air to circulate 

around the sensor.  

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper 

placement of both the display unit and outdoor sensor are critical to the 

accuracy and performance of this product.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct  

  sunlight and away from any heat sources or vents. 
• Display unit and outdoor sensor must be within 330 ft (100 m) of each other. 
• To maximize wireless range, place units away from large metallic items, thick  

  walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 3 ft (.9 m) away  

  from electronic devices (TV, computer, microwave, radio, etc.).

Setup is Complete

The sensor will now synchronize with the alarm clock. It may take a few 

minutes for synchronization to complete.

TV

3

(100 meters)

(330 feet maximum)

(.91 m)

AT

LEAST

APART