background image

Care & Maintenance 

Display Unit Care 

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep 

away from dust, dirt and moisture. Clean ventilation ports regularly with a 

gentle puff of air.

 

Outdoor Sensor Care 

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

 

Calibration 

The indoor / outdoor temperature and humidity readings, and barometric 

pressure can be calibrated on the display unit to improve accuracy. Calibration 

can improve accuracy when sensor placement or environmental factors impact 

the data accuracy.

 

1. To access calibration mode, press AND HOLD the “

 

”, “

 

”, and “

 

” 

buttons simultaneously for at least 5 seconds.

 

2. To adjust the currently selected (flashing) item, press and release the “

 

“ 

or “  “ buttons to calibrate the data value higher or lower from the actual 

3. To save your adjustments, press and release the “

 

” button to adjust the 

next preference. The “

 

” icon will remain illuminated next to calibrated 

values.

 

The preference set order is as follows:

 

OUTDOOR TEMPERATURE

 

OUTDOOR HUMIDITY

 

INDOOR TEMPERATURE

 

INDOOR HUMIDITY

 

BAROMETRIC PRESSURE  (must be set to MANUAL mode to calibrate)*

 

*To change from AUTO to MANUAL pressure mode and vice versa, press 

AND HOLD the “

 

” button for at least 10 seconds. The display indicates 

the current pressure mode selected,“AUTO” or “MANUAL”. 

After 20 seconds of inactivity, the display will save the adjustments and exit 

calibration mode. Note: Calibrations will be erased if the display is reset or if 

batteries are removed and the power adapter is unplugged. 

reading. 

12 

Summary of Contents for 2038

















Reviews: