background image

 “ 

Intelli-Time

®

 Clock 

Intelli-Time products are pre-programmed with the correct time and date. 

Intelli-Time technology instructs the time and date to set themselves. All you 

need to do is select your Time Zone and Daylight Saving Time preferences. The 

clock will then automatically set itself and change for Daylight Saving Time.

 

Set the Time, Date & Units 

Press the “  ” button, located on the back of the display unit, to enter SET 

MODE. Once in set mode, the preference you are currently setting will blink on 

the display.

 

To adjust the currently selected (flashing) item, press and release the “

 

“ or 

“ buttons (press and HOLD to fast adjust).

 

To save your adjustments, press and release the “

 

” button again to adjust 

the next preference. The preference set order is as follows:

 

TIME ZONE ( PST MST CST EST AST HAST AKST)

 

DST (Daylight Saving Time ON or OFF)*

 

CLOCK HOUR

 

CLOCK MINUTE 

CALENDAR MONTH

 

CALENDAR DATE

 

CALENDAR YEAR

 

TEMPERATURE UNITS (ºF or ºC)

 

PRESSURE UNITS (inHg or hPa)

 

*If you live in an area that observes DST, DST should be set to ON, even if it is 

not currently Daylight Saving Time.

 

You will automatically exit SET MODE if no buttons are pressed for 10 seconds. 

Enter setup mode at any time by pressing the “

 

” button.

 

Display Backlight Settings 

This weather station’s color display features three different lighting settings: 

High (100%) brightness, Medium (60%) brightness and Low (30%) brightness

 

Using battery power alone, the backlight is available momentarily for 10 

seconds by pressing the “BACKLIGHT” button.

 

When display is powered with the power adapter, backlight remains on at 

100% brightness. Press “BACKLIGHT” button once to dim to 60% brightness; 

press again to dim to 30%, press a 3rd time to enter “AUTO DIM” mode. 

“AUTO DIM” will appear to the left of the time.

 

AUTO DIM MODE: 

Automatically adjusts display brightness based on time of day & year. 

MARCH 11- NOVEMBER 4

 

6:00 a.m. - 9:00 p.m. = 100% brightness

 

9:01 p.m. - 5:59 a.m.= 30% brightness

 

NOVEMBER 5 - MARCH 10

 

7:30 a.m. - 7:00 p.m.= 100% brightness

 

7:01 p.m. - 7:29 a.m. = 30% brightness

 

Summary of Contents for 2038

















Reviews: