3
4
Optional: Install
Lightning Detection Sensor
AcuRite sensors are sensitive to
surrounding environmental conditions.
Proper placement of the outdoor device is
critical to the accuracy and performance
of this product.
4
5
If you have the optional Lightning
Detection Sensor, insert it in the battery
Note: If you do not have a Lightning
Detection Sensor, you can always add
one later. Visit www.Acurite.com for
more information.
Outdoor Device Placement
AcuRite Atlas is designed to remain outdoors all year long. Mount the
outdoor device in a location that meets all the requirements below:
Located within 330 feet (100 m) of receiving device
(AcuRite Atlas indoor display or AcuRite Access)
Some construction materials and other sources of
interference may reduce this distance.
At least 5 feet (1.5 meters) off the ground
Rear solar panel is facing south
Away from heat and humidity sources
Level for accurate rain reporting
Mount Device Outdoors
Placement for Maximum Accuracy
Important Additional Placement Guidelines
Choose an open location with no obstructions above or around the outdoor device for the most accurate measurements.
Maximize Wireless Range
Place outdoor device away from large metallic items, thick
walls, metal surfaces, or other objects that may limit wireless
communication.
Maximize Temperature Accuracy
Position outdoor device away from heaters, air
conditioners, chimneys, exhaust vents, asphalt and
concrete (surfaces that radiate heat).
Maximize Humidity Accuracy
Avoid installing the outdoor device near pools, spas, or
other bodies of water.
Maximize Wind Accuracy
It’s recommended to mount the outdoor device at least
5 feet (1.5 meters) off the ground, higher is better for wind
measurement. The National Weather Service recommends
33 feet (10 meters) high. Avoid nearby wind obstructions
such as trees and buildings. Be sure to mount the outdoor
device securely, as swaying or shaking may cause
inaccurate rain or wind readings.
Note: Consider the optional Wind Extension kit (may be
purchased separately) to extend the wind speed and
direction sensors an additional 30 feet (9 meters) from
the outdoor device to maximize the accuracy of wind
measurements.
Locate Away from Sprinkler Heads
DO NOT install the outdoor device where it will be sprayed
by a sprinkler system. This may force water inside the
device.
SOUTH
OR
