background image

Adjust the Wind Vane Orientation (Optional)

Note: 

Most users will not need to complete this step.

When mounting the AcuRite Atlas outdoor device, as 

long as the rear solar panel is facing south, the wind 

the factory. However, if you must mount the outdoor 

device in a different direction or otherwise need to adjust 

its wind vane orientation, complete the steps below.

1.  

In the battery 

compartment of the 

outdoor device, locate 

and press the calibration 

button. The red LED 

2.  

Point the wind vane to  

north. You may need a  

 

north orientation.

3.  

While holding the vane  

facing north, press the  

calibration button in the  

battery compartment again.  

 

rapidly. Wind direction  

information will now use 

the new orientation.

NORTH

TEMPERATURE RANGE

HUMIDITY RANGE

WIND SPEED

WIND DIRECTION

RAIN

UV INDEX

LIGHT INTENSITY

*LIGHTNING

-40 to 158

°

F (-40 to 70

°

C)

30 seconds

30 seconds

10 seconds

30 seconds

30 seconds

30 seconds

30 seconds

10 seconds

1-100% RH

0-160 mph (0-257 km/h)

360

°

.01 inch intervals (mm) 

0 to 15 index

to 120,000 Lumens

Up to 25 miles away (40 km)

Operating  

Range

Reading 

Frequency

Accuracy

+_

1

°

F

+_

3

°

+_

2%RH

+_

5%

+_

1

n/a

n/a

+_

1mph  10 mph 

<_

+_

10%  10 mph 

>

6

7

HAVING PROBLEMS?

We’re Here to Help.

Get more information or download the full 

AcuRite Atlas™ product manual.

Visit us online

www.AcuRite.com

Limited One (1) Year Warranty

A

We warrant that the AcuRite Atlas Environmental Monitoring station premium product we manufacture and cover under this 

warranty is of good material and workmanship and, when properly installed and operated, will be free of defects for a period 

of one (1) year from the date of purchase.
The AcuRite Atlas Environmental Monitoring station which, under normal use and service, is proven to breach the warranty 

contained herein within ONE (1) YEAR from date of sale will, upon examination by us, and at our sole option, be repaired 

or replaced by us. Transportation costs and charges for returned goods shall be paid for by the purchaser. We hereby 

disclaim all responsibility for such transportation costs and charges. This warranty does not cover normal wear and tear not 

affecting the functionality of the product, or products that have been damaged (including by acts of nature), tampered with, 

abused, improperly installed, or repaired or altered by anyone other than our authorized representatives. Remedy for breach 

of this warranty is limited to repair or replacement of the defective item(s). If we determine that repair or replacement is not 

feasible, we may, at our option, refund the amount of the original purchase price (excluding shipping). 
THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY FOR THE ACURITE ATLAS ENVIRONMENTAL MONITORING 

STATION PREMIUM PRODUCT AND IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL 

WARRANTIES OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN ARE HEREBY EXPRESSLY DISCLAIMED TO 

THE EXTENT PERMITTED BY LAW.
We expressly disclaim all liability for special, consequential, or incidental damages, whether arising in tort or by contract 

from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential 

damages, so the above limitation or exclusion may not apply to you. We further disclaim liability from personal injury 

relating to its products to the extent permitted by law. By acceptance of any of our products, the purchaser assumes all 

any other obligation or liability in connection with the sale of our pr

is authorized to modify or waive the terms of this warranty unless done in writing and signed by a duly authorized agent 

of ours. In no case shall our liability for any claim relating to our products, your purchase or your use thereof, exceed the 

original purchase price paid for the product.
WARRANTY CLAIMS 
T
1. Contact AcuRite Support at support@chaney-inst.com and provide opportunity for Customer Support to resolve any issue
2. In the event that an issue cannot be resolved over the phone, customer shall send the product(s) in for evaluation to AcuRite 

at the contact address (see below)
3. Chaney Instrument Service department will repair or replace product as necessary after evaluation
The terms of this Limited Warranty shall be governed in all respects by and construed in accordance with the laws of the State 

out of this Limited Warranty or your use of the product shall be in the state court located in Walworth County, Wisconsin. You 

agree to submit to the jurisdiction of such court.
Contact Information 

If you have questions about this Limited Warranty, please contact us at: 
AcuRite 

Attn: Warranty Inquiry 

965 Wells St, Lake Geneva, WI 53147 

warranty@chaney-inst.com

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the 

following two conditions:

1- This device may NOT cause harmful interference, and

2- This device must accept any interference received, including interference 

that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or 

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to 

 

   which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference 

caused by unauthorized modifications to this equipment. Such modifications 

could void the user authority to operate the equipment.
©Chaney Instrument Co. All rights reserved.  AcuRite is a registered 

trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other 

trademarks and copyrights are the property of their respective owners. 

AcuRite uses patented technology. 
Visit www.AcuRite.com/patents for details.

Summary of Contents for Atlas 06061





















Reviews: