Alarms provide a quick and
easy way to know when a
condition you are monitoring
has reached a certain
threshold. When a condition
set in an alarm is reached, the
indoor display activates an
an audible alarm and a
display.
ALARMS
About The Alarm
Features
Alarms can be set for
temperature, humidity,
rainfall, wind speed, time,
and forecasted storms.
Set the audible alarm volume
or set the volume to off.
Set a single alarm or all
alarms to be disabled – for
those times you do not want
to be disturbed.
How To Set An Alarm
1.
From the top-left section, select the
Menu icon (
).
2.
Select Alarms.
3.
Select Indoor
on readings taken by the display.
Select Outdoor
readings taken by the outdoor device.
4.
Using the left and right arrows, select
an alarm type > select Next.
5.
Set the condition that activates the
alarm. When the condition is reached,
6.
Verify the alarm icon
is set to ON.
7.
Select Save and Exit.
How To Adjust The Alarm Volume
1.
From the bottom-left of the display, locate
the alarm volume icon.
2.
To adjust the alarm volume, press the alarm
volume icon to the desired level.
To turn off the audible alarm, adjust the
level until
X
is displayed. When set to
alarm is active.
How To Silence An Active Alarm
1.
Push anywhere on screen to clear the
trigger again the next time the parameter
is reached.
2.
Press the button
twice to disable the
alarm. The alarm
will not trigger again unless it is turned
back on in Alarm Settings.
indoor
temperature
set alarms
Sensor ID
A
Sensor Type
ATLAS 7
55
ON
low alarm
high alarm
OFF
save and exit
cancel
99
to turn off alarm
press TWO TIMES
8
9
How To View
A 6 Or 48-Hour Reading Chart
1.
From the main screen, select a
reading type.
2.
From the top-section of the screen,
select last 48 hours or last 6 hours.
How To View Monthly
Reading Records
1.
From the top-left section, select the
Menu icon (
).
2.
Select Records > Calendar.
3.
To change the month displayed, use the
left or right arrow to select a month.
Charts &
Monthly Records
The indoor display stores in
its local memory the last 48
hours of readings that are
displayed in charts and the
monthly reading records.
Charts
Available for Indoor and
Outdoor Temperature
and Humidity, Barometric
Pressure, Light Intensity,
UV, Wind Speed, Lightning,
and Rainfall.
Monthly Reading Records
Shows high, low, and
accumulation reading
records by month.
You can delete the current day’s readings – this
feature is commonly accessed when inaccurate
readings occur during the setup procedure or
due to outdoor device mounting changes.
1.
From the top-left section, select the Menu
icon
( ).
2.
Select Records.
3.
Select Clear Today’s Records. Today’s records
for all reading types are permanently deleted.
How To Delete Today’s Records
The indoor display stores the last 48 hours
of readings in its local memory. If you want
to save detailed historical readings, you can
automatically log the readings on an SD
Card (not supplied).
The indoor display can use an SD Card
with up to 32 GB of space.
Readings are saved to the SD Card every
10 seconds.
Calibrations made to readings on the
readings sent to the SD Card.
Save Extended Historical
Readings
(Optional SD Card)
