AD-net Technology., CO LTD
www.ad-net.com.tw
-
1-
1.
General
1.1
Overview
Thank you for selecting the AN-TDM-IP-1E1/2E1-A E1/T1 over Ethernet
multiplexer product designed and made by AD-net Technology., LTD The product
adopt the innovative TDM over IP technology, with IP circuit emulation that
supports transportation of 1~2 E1 /T1 over FE port, that can be used to provide E1
communication channels over Ethernet or IP networks.
In addition, AN-TDM-IP-1E1/2E1-A equipment also support the 2 local
Ethernet data access, its internal buildup QoS which set the local Ethernet priority is
lower than T1 / E1 data, so as to ensure the T1 / E1 signal priority transmission.
The AN-TDM-IP-1E1/2E1-A have many optional parameters, which can be
modified by the user to suite different application requirements. Please read this
manual carefully before installing the product.
1.2
Features
AN-TDM-IP-1E1-A provide 1 channel of E1/T1 over 1 Ethernet adaptive
AN-TDM-IP-2E1-A provide 2 channels of E1/T1 over 1 Ethernet adaptive
Provide 4 FE electrical ports (2 for uplink, 2 for user data or monitoring) and 1
Ethernet optical port optical port can be used for uplink or user data.
Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support
IP/UDP.
User-friendly Web server supported for easy setup and maintenance
Support SNMP V1/V2 network management
E1 clock supports 3 mode: local clock, adaptive and loopback
E1 service support lossless protection
Ethernet built-in layer 2 switch, support VLAN(802.1Q based and QinQ based),
QoS(port based
、
8021.1P based and TOS based)
Ethernet support IEEE 802.3x and MAC address automatic learning
Ethernet packet size up to 9720byte
Point to point and point to multipoint supported
Software and hardware online upgrade
Support SNTP network time setting
Support software test E1 error
1.3
Applications
AN-TDM-IP-1E1-A could be worked with E1 over Ethernet interface
Manuel de l'usager du Mux IP vers 2xE1
www.hypercable.fr
