background image

10

WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:

1.   If the standard or serial product number will be changed, erased, re-
moved or wil be unreadable.

2.   Periodic maintenance, repair or changing parts as a result of their nor-
mal runout.

3.   All adaptations and modifications with the purpose of improvement 

and expansion of normal sphere of product application, mentioned in the 
service instruction, without tentative written agreement of the expert pro-
vider.

4.   Service by anyone other than an authorized service center.

5.   Damage to products or parts caused by misuse, including, without lim-
itation, misapplication or nrgligence of the terms of service instruction.

6.   Power supply units, chargers, accessories, wearing parts.

7.   Products, damaged from mishandling, faulty adjustment, maintenance 
with low-quality and non-standard materials, presence of any liquids and 
foreign objects inside the product.

8.   Acts of God and/or actions of third persons.

9.   In case of unwarranted repair till the end of warranty period because 
of damages during the operation of the product, it’s transportation and 
storing, warranty doesn’t resume.

Summary of Contents for 2D Basic Level













Reviews: